next »

[K8SY]

Hi All this is my Brothers Boss freestlye frame forks and Dyno pretzel bars back from Electroplating Technologies in Queanbeyan. Awesome job, had a bit of trouble around the frame standers but otherwise outstanding. Since my brother has moved back to Hervey bay again possession is 9/10ths of the law right so it gets to live with me 

Yellow thing 2 from the top BEFORE (was originally chrome when new then I sold to brother) -



All the goodies



Framestander



Headtube



Forks



Rear Dropout

[COASTY]

Nice one mate. Thats a good lookin' frame! Should be nice built up!
So your bro is back again? LOL

[K8SY]

Nice one mate. Thats a good lookin' frame! Should be nice built up!
So your bro is back again? LOL

Yeah will look sweet, he still had his old Araya 48's with a Pergrine front hub and a Suntour freecoaster (has a small dial to change from freewheel to caster brake) that he was going to throw away and get new ones till I said "NOOOOOOOOOOOOOO!" Just need shite loads of other gear to finish now LOL.

He moved back about 6 weeks ago now to be closer to his boys.

[dcbmx1]

That is sweet to see a ultra-rare US Made Boss Freestyler in Australia.  Carlo Lucia welded a few of those.  The Taiwan made forks had the Landing gear style with the screw in pegs.  The Taiwan made Boss Freestyler frame had the regular (non machined) headtube and a different serial number on the dropout from the frame you have.  I hope you get the 2010 L+S 20 XL chrome plated as well !

[Phil Kaye]

Welcome to the the site DC.
That chrome job is sensational!! 

[COASTY]

Welcome Darren. Good to see you on our site.
Nice work with the frames too. I'd love one of those 26"ers.

[Phil Kaye]

Katesy, what are the other frames?

[K8SY]

Hey Darren cheers for the L&S mate  going for clear over the raw for now and see how it comes out.

Not much info here on Boss so post away dude will be very much appreciated.

[K8SY]

Katesy, what are the other frames?

2009 Felt XL
The Boss FS before being chromed
My 87ish Boss Pro
My Boys 86 Boss Junior
Reliance I gave away a few weeks ago and has been rebuilt by the new owner and done its first Retro.

[K8SY]

That is sweet to see a ultra-rare US Made Boss Freestyler in Australia.  Carlo Lucia welded a few of those.  The Taiwan made forks had the Landing gear style with the screw in pegs.  The Taiwan made Boss Freestyler frame had the regular (non machined) headtube and a different serial number on the dropout from the frame you have.  I hope you get the 2010 L+S 20 XL chrome plated as well !

Hey Darren cheers for the L&S mate  going for clear over the raw for now and see how it comes out.

Not much info here on Boss so post away dude will be very much appreciated.

Post em here Darren

http://www.vintageoldschoolbmx.com/smf/index.php/topic,1141.0.html