mixed bag of surplus parts

Black Odyssey Jim Cilencki pedals - not new but very light use, couple of very minor marks on ends otherwise new condition, 9/16 thread, aluminum body, looseball bearings $35.00 posted

pair of black Oury mtb grips, these are the ones with hardly any flange/collar and you need bar end plugs as they are open on the outside. still in bag $18.00 posted

set of 5 Blue chainring bolts. used but you wouldnt know to look at. $15.00 posted

Crazy red bearingless pedals, thats right no bearings. light as ... the two of these weigh about the same as one of the black oddyssey JC's. 1/2" thread. new/unused. chin faung brand. $18 posted

seat posts, the blue drain pipe (paint is flaking), white lay back (new) and straight chrome (used but good nick) posts all 22 mm diam, $12.00 each posted
the chrome layback one is 25mm diam. it does have a ring gouged in the chrome around where it sat in my FS880 frame but i had the seat up pretty high so prob wont see when fitted by most . other than that it still looks new. $15.00 posted

no name unrestored slant stem, chrome has a bit of rust underneath in the tight angle bit but not drastic, bolt heads could do with re chrome but all threads okay. $18.00 posted

2 x porkchop seat clamps, one gold - one red. both unused $5 each + what ever the post is'

New school flight 44 tooth chainwheel, used but only minor cosmetic marks $25 posted

unknown brand stem 1 1/8th threaless with 50mm reach from Centre of headtube to centre of bars. Minimum time and effort and this thing could be mirror finish. bolts a bit rusty though inside the allen key hex hole. $15.00 posted

175mm Sakae SA cranks. these have a couple of hammer marks that ive tried to show as best as possible, they'll come out but it wont be a five minute buff job. the peddle threads and square tapers are in good nick but the thread on the non drive side that you would normally screw a crank puller into is stripped. if you can live with that and willing to put in some time on the linisher and buffer you'll end up with nice set of cranks. I'm too busy (lazy). if these dont sell i'll get around to them one day but i cant see it being any time soon $35.00 posted

hub shells/ body only- no axles, bearings and caps etc. Neither looks to have ever been laced to a hoop
both are silver but slighltly different finish
rear shimano highflange 36 hole , date stamped CF -$ 30 posted
Front high flange 36 hole ACS date stamped 30/80 -$15 posted or $40 for the pair posted
also have pair of ACS decals if you want to go with these for extra $10.00

paypal works for me but not fussy, can deliver to Brissy this sunday if that helps anyone
if my pricing is unrealistic pm me an offer, if you want better or more pics pm me and I'll see what i can do... it'll only end up on the bay if no one here wants it.
swaps i might be interested in :-....
suntour red seat clamp and head set lock
suntour 16t freewheel