next »

[Tim]

Hey does anyone know how I would go about removing the axles from
these so I can get them annodised black?
http://www.mec.ca/Products/product_image.jsp;jsessionid=BNTLJPNFt2nJcCTswysTgvQsJ0z2Y9WT2lCPK67RpzGHfdv3TRHj!-1357266277?FOLDER%3C%3Efolder_id=2534374302693563&PRODUCT%3C%3Eprd_id=845524441777437&bmUID=1238322661228
Also where would I get a new cap for the end as I'm guessing that has to comew out and they are split anyway.
Cheers Tim

[COASTY]

Tim, they are exactly what Sara bought for Ardyns bike!
The plastic cap will come out and is reuseable. Use a very thin jewlers screwdriver or a nife. Should pop out easily.
The nut(s) behind are like cones. Same as any other pedal and then the axle will slide out.
The reflectors will pop out too.

[Tim]

Woo hoo thanks mate, the caps are stuffed but i can always spin up some from nylon on the lathe.